4272015121935pm_635_huawei_ascend_p8_lite

Root Huawei P8 and Install TWRP Recovery [ GUIDE EASY ]

Posted on

4272015121935pm_635_huawei_ascend_p8_lite

A recreation altering system from Huawei is some thing that was obligatory from the chinese language agency after seeing opposite numbers such as Xiaomi easiest way climb the revenue charts all round the world. For the most part Huawei had a huge attraction in the chinese language market when they began arising high end smartphones to go alongside with the call that was structured for production networking and verbal exchange components.

The P8, the company’s foreign money flagship succeeding the P7 is really what Huawei was women and men. A thinker with suitable mainstream Western enchantment. Many of the Huawei units failed to garner that a whole lot obligatory consideration in the U.S. market.

Running on all selfmade standards Huawei power not to go alongside with the the loads and as a substitute opt for their very own 2GHz 64bit HiSilicon Kirin 930 chipset. attention an able performer, the Kirin chipset doesn’t quite suit the already structured Snapdragon 810 or the Exynos found in Samsung devices.

Other elements come with a 1080p fifty two. demands, 3GB RAM, a fairly first rate thirteen megapixel rear digicam with a eight megapixel entrance shooter. Powering all this is a 2680mAh battery which should get you through a day’s usage.

Although it’s not fair to say that there hasn’t been an awful lot advancement on Huawei telephones however it’s slowly getting there. And these days we are going to reveal you how to increase the functionalities of the Huawei P8 by flashing the TWRP custom recovery.

For those who don’t know what a custom restoration is, A custom restoration is a third-party restoration atmosphere. A custom restoration does the same things as the inventory restoration alongside with further aspects. Custom recoveries often have the capability to create and repair gadget backups.

Preparations

First of all you will need to ensure a few things before we start:

Confirm you are using an unlocked Huawei P8
Note: Carrier models might not work with this method. User is to perform this at their own risk.

  • Ensure that you have the necessary Huawei installed .
  • Check if you have at least 80-85% of battery charge. We don’t want the phone dying in the middle of the process.
  • If you have done this process before on other devices then you must be familiar with ADB and fastboot. Ensure that you have it installed.
  • Enable USB-Debugging from Developer Options in the Settings menu.
    • If you cannot find Developer Options, then you’ll have to first enable it by going to Settings -> About Phone -> Build Number and tap it 7 times until you see a small notification that you have enabled it.
    • Then return to the Settings menu, you should find Developer Options there. Open it and enable USB Debugging.
    • Make sure that you have backed up all your personal data and apps as all data might be erased!
      • For Contacts, Calendar and People details use Google Accounts Sync to backup
      • For Apps and App Data check out

Disclaimer: The following procedure is highly risky and there are chances that you may brick your phone if not performed correctly, DroidViews cannot be held responsible if that happens. So user should tread cautiously and at their own risk.

Downloads

You will need to download these files on keep them on your Desktop.

TWRP for Huawei P8: Download here 

SuperSU: Here

Flashing TWRP on your Huawei P8

After preparing your device along with all the required files we can start flashing.

Step 1 – Connect your Huawei P8 to your PC using the USB Data cable.

Step 2 – Open Command Prompt and type the following command

adb devices

You should be getting a message saying ‘List of devices attached’ along with your device name. This will confirm that adb has recognized your device.

If you don’t see your device it means you haven’t properly installed your device USB drivers.

Step 3 – Next reboot your device in fastboot/bootloader mode by typing this command in Command prompt

adb reboot bootloader

Step 4 – Now change the directory of your Command prompt to your Desktop by typing this command

cd Desktop

Step 5 – Type the following command next and press Enter

fastboot flash recovery twrp-2.8.7.0-p8.img

This will flash TWRP custom recovery on your Huawei P8 replacing the stock recovery.

Step 6 – Once the flashing is complete, select RECOVERY from the Fastboot menu to enter Recovery Mode, use the volume keys to navigate.

Step 7 – If you see the TWRP logo, then you have successfully performed the steps on you now have TWRP custom recovery installed on your Huawei P8!

Step 8 – You will now see the TWRP Touch Recovery Menu, Select ‘Reboot’ to reboot you device and exit from the recovery.

Rooting the Huawei P8

Now that we have successfully flashed the TWRP custom recovery you have the freedom to start flashing custom ROMs, kernels and other modifications, it’s time to move ahead and root the device, so that we can start using root applications.

Step 1 – Once the device boots up normally, re-connect it to you PC using the USB cable.

Step 2 – Copy the SuperSU.zip file you had downloaded earlier from your Desktop into the root directory of your internal storage.

Step 3 – Reboot you Huawei P8 into Recovery Mode.

Step 4 – Select ‘Install’ and scroll all the way to the bottom till you see the ‘SuperSU.zip’ file.

Step 5 – Select the .zip file and swipe the bar to confirm. This will start flashing the .zip file.

Step 6 – Once the flashing finished you will see the ‘Reboot System’ option, click it to reboot your device.

Once the device reboots you will see the SuperSU app appear in your app menu. You can also confirm if your device is rooted by installing and running the Root Checker application.

Incoming search terms:

Leave a Reply

Your email address will not be published. Required fields are marked *